|
外觀尺寸
|
W 80 mm x D 99 mm x H 98 mm
|
|
適合光源(輸出定額)
|
24 VDC lighting
4 channels total: 200 W (1 channel 50 W or less)
|
|
通道數(shù)
|
4 channels
|
|
發(fā)光方式
|
Continuous lighting, strobe lighting (overdrive when emission time is 1000 μs or less)
|
|
頻閃發(fā)光時間
|
[PWM frequency 100 kHz: Lighting time]
10 μs ~ 9990 μs (10 μs steps), 1 ms to 999 ms (1 ms steps)
[PWM frequency 130 kHz: lighting time]
7.7 μs ~ 7684.6 μs (7.7 μs steps), 1 ms ~ 999 ms (1 ms steps)
[Lighting cycle limit]
Duty 7% (requires cycle of 14.3x or more pulse width)
|
|
驅動方式
|
Constant lighting
|
|
調光方式
|
PWM control (frequency: 100 kHz, 130 kHz), variable-voltage control
|
|
輸入電流
|
24 VDC ± 10 %
|
|
輸出電壓
|
PWM mode: 24 VDC
Strobe mode*1: 48 VDC
Variable-voltage mode*2: LOW: 12 to 24 V, HIGH: 18 to 24 V
*1 Automatically switches to 24 VDC drive when strobe emission time is 1 ms or more (the lighting time is set in units of ms).
Applies 48 VDC drive when strobe emission time is 1,000 μs or less (the lighting time is set in units of μs).
*2 Overdrive is unavailable in variable-voltage mode.
|
|
輸出電流
|
Storobe mode: 5.0 A/channel (Duty 7%)
|
|
外部控制方式
|
USB communication (Full-speed, Type-C connector)
Parallel communication
RS-232C communication
|
|
通信接口
|
USB communication: Serial communication via virtual COM port
RS-232C communication: 4800 / 9600 / 19200 / 38400 / 57600 / 115200 bps
|
|
輸出端口
|
SMP-03V-BC
|
|
適合規(guī)格
|
[Compatible standards]
CE, UKCA (Non-compliant with KC)
[Environmental regulations]
RoHS, REACH
[Degree of protection]
IP20 (IEC 60529)
|
|
使用溫濕度
|
Temperature: 0 to 40°C, Humidity: 20 to 85%RH (no condensation)
|
|
保存溫濕度
|
Temperature: -20 to 60°C, Humidity: 20 to 85%RH (no condensation)
|
|
冷卻方式
|
Natural air-cooling
|
|
重量
|
360 g
|
|
材質
|
Polycarbonate
|
|
附屬品
|
Hardware manual x1, trigger connector x1, power connector x1
|
|
注意事項
|
See the URL below for the combinations of LED lighting available when using strobe overdrive.
How to Check Lighting Connection Combinations
|
|
備注
|
Vibration resistance: 10-55 Hz double amplitude 1.5 mm X, Y, Z directions 2 hours each
Impact resistance: Approx. 10 G, X, Y, Z directions 3 times each
|